Install MTK MediaTek Preloader USB Vcom Drivers (Unsigned) in Windows 10
Installing Mediatek USB Preloader VCOM Drivers in Windows 10 is a hectic process because these drivers are not digitally signed and after Windows 8.1 Microsoft has disabled the installation of installing these unsigned drivers due to security measures. So in this tutorial, I am going to show you the process to first disable the Windows Driver Signature Verification and after that Install these drivers in a proper way.
This Guide works with Windows Windows 10 and Updates, for other Windows follow the below links:
Note: Driver Signature Verification is disabled only for the current boot, it will be enabled again if you reboot.
Step 1: Firstly download the MTK USB VCOM Driver from any of links below and extract them to a suitable location.
Step 2: Open Device Manager by right-clicking on the start button and select Device Manager or by searching Device Manager in the Cortana search.
Step 3: In the Device Manager Windows right click on your username and select Add Legacy hardware.
Step 4: Add Hardware wizard will popup just click on the Next button to proceed.
Step 5: In the next step select second option saying “Install the hardware that I manually select from a list (Advanced)” and click on Next button.
Step 6: Next you will see a long list of Hardware Types. Just select Show All Devices and click Next.
Step 7: Click on Have Disk in the next windows and select .inf file according to PC environment that you extracted in Step 1.
Step 8: Once selected, click on Next button. You will get a Windows Security Warning asking to install unsigned drivers, just click on Install Anyway.
That’s it, Your MTK drivers are successfully installed. Restart your system and connect your MediaTek MTK device, now you can your flash tools to start flashing custom ROMS and Firmware.
If you face any problem while installing leave your queries the comments below.