How to Install CWM Recovery in Micromax A350 Canvas Knight
Earlier i posted about rooting Micromax Canvas Knight A350 with RootGenius and now this time it is about Installing ClockWorkMod 5.5.0.4 Recovery in Micromax A350.
How to Install CWM Recovery :-
Requirements :-
So, let’s begin
Steps to follow :-
Step 1 :- Firstly Download and Install A350 Drivers for your phone from the download section below.
Step 2 :- Next Download “recovery.img” (CWM 5.5.0.4) and “MT6592_Android_scatter.txt” file from the download section below and paste both of them in a same folder on your PC.
Step 3 :- Now download SP Flash Tools, Extact and Run it.
Step 4 :- In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
Select the file “MT6592_Android_scatter.txt” which we already downloaded.
Step 5 :- Now in SP Flash tools after loading the scatter file, Check only recovery.img and uncheck all others.
Step 6 :- Next in Flash Tools, Click the Download button and the flash tool will start looking for your phone.
Step 7 :- Now Switch Off your phone and connect it to your PC with USB Cable.
Step 8 :- The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
After the process completes, a green ring will appear on your device signalling that the process was successful.
Disconnect your phone and Power it on, Now go to recovery mode and verify your successful recovery installation.
Required Downloads :-
Rooting Guide for Micromax A350 Canvas Knight
If you face any problem then please comment below.
Subscribe to our mailing list below for Micromax A350 Custom Roms, Tricks and Tutorials and More.
View Comments
This technique is not working on my canvas knight.
After entering the boot up menu by pressing power button+ volume (UP+DOWN), I select recovery mode and the phone just boots up.
First enable usb debugging from developer options in settings, and then repeat the above steps.
The Mt6592 Scatter File isn't getting downloaded. I have a windows 8.1 pc. Please help.
I am not able to complete cwm recovery setup. Flash Tool started but didn't show any status.
Same here, ZERO!
Please help someone :(
nothing going on after clicking on download
download not starting
Thanks brother! It worked for me, atleast!
Just make sure you have USB debugging turned on!